Stay up to date on new products, promotions, and more!

  • Support
  • Company
  • Dealer Locator

3.5in Jeep Suspension Lift Kit

Jeep Suspension Lift Kit [608S]
Jeep Suspension Lift Kit [609S] Installed
Jeep Suspension Lift Kit [609S] Installed
Jeep Suspension Lift Kit [609S] Installed
Jeep Rear Coil Correction Plates CAD
Jeep Rear Coil Correction Plates CAD
In stock
SKU: 608S | Brand: Rough Country
Make sure it fits!


Our Series II Jeep JK 3.5" Lift Kit is specifically designed to give the smoothest highway ride while maintaining great off-road performance. Rough Country engineers each component, focusing on meeting and exceeding the OEM standards that set the bar for stock Jeep equipment. Everything from ensuring the angle of your track-bar to maximizing vibration absorption via rubber bushings - we guarantee this kit will give you the best of both worlds. As a matter of fact, if you aren't completely satisfied with your Jeep's handling both on and off the trail just ship the kit back for a FULL REFUND within 60 days. Read More

  • Download Instructions
  • Install Time: 4-5 hours
    Average estimated install time peformed by a professional shop or mechanic.
  • Tires: 35x12.50 R17
    Recommended tire size for use with this kit. Please see Instructions for complete notes on this tire size recommendation.
  • Wheel BS: 4.5" - 4.75"
    Recommended wheel backspacing for use with this kit. Please see Instructions for complete notes on wheel backspacing.
  • Features

  • Easy bolt-on installation
  • Increased ground clearance
  • Coil correction plates correct the rear coil spring angle by 10 degrees, allowing them to function more effeciently.
  • Factory tuned coil springs are based on the stock spring rate
  • Control arms include Clevite brand OEM style rubber bushings
  • Includes application valved N2.0 series shock absorbers which offer the best in balanced performance for on and off-road use.
  • Notes

  • Does NOT fit 4-door (Unlimited) models.
  • 2012-2015 models require exhaust modifications to clear the front driveshaft. (#1030)
  • On Automatic equipped vehicles; due to use of an oversize driveshaft from the factory and inadequate factory clearance it may be possible for the front driveshaft to come in contact with the automatic transmission pan tearing the factory boot and rubbing on the shaft. Generally this occurs during heavy articulation when front sway bar links are disconnected and longer shocks are installed. If this is found to occur, the proper procedure would be to replace the oversize factory shaft with an aftermarket smaller diameter shaft to increase clearance between the transmission and front driveshaft. Rough Country does offer this driveshaft if needed.
This product features Rough Country's Lifetime Replacement Warranty. All products are warranted to be free from defects in material and craftsmanship for the life of the vehicle if utilized in accordance with the manufacturer's instructions for installation and operation of said products. For complete details and coverage information please click here.
We are proud to offer Same Day Shipping. If you place your order before 4pm (cst) your order will be shipped that day. Parts ordered must be in stock for the order to ship. Approximately 97% of all orders placed leave our warehouses within 24 to 48 hours(not including weekends & holidays). For complete details please click here.


  • Front
  • Lifted coil springs
  • Fixed lower control arms
  • Track bar drop bracket
  • Pitman arm
  • Brake line relocation brackets
  • Hardware
  • Rear
  • Lifted coil springs
  • Coil correction plates
  • Track bar drop bracket
  • Extended sway-bar links
  • Brake line relocation brackets
  • Hardware
  • Shocks
  • (4) Premium N2.0 Series

Fitment Table

Years Drive Make Model
2007-20154WDJeepJK Wrangler
2-door models ONLY
Always check the product's overview, for more important fitment information


  1. for the money really nice set up - Posted by: quadrunner (3/28/15)

    The install was easy took a day at a slow pace the ride is better than stock the only thing I don't like is the slight vibration I get now I believe it's from the stock stabilizer tho

  2. Pretty Darn Good - Posted by: Zac (1/22/15)

    Put this kit on my 2door and it made my offroading experience much better. The install was fairly easy, just time consuming. Fits my 35's perfectly. Could probably fit 37's, I dont know for sure but it looks likt it could. The shocks arent my favorite but i have been spoiled with bilsteins. I also got the 1310 driveshaft to go with it and there is no more driveshaft rubbing on the auto trans pan and way less vibrations on the road.

  3. Can't beat the price and ride! - Posted by: Ben (12/10/13)

    I threw one of these on the wife's jkul. It went on really smooth. No major hiccups at all. We used the dual stabelizer setup and it now rolls down the highway a lot better than it it did stock. Way better ride. She babies It a little bit and honestly spends most of its time as a mall crawler but dont let that change your impression of this setup. The few trails we've been on with this lift have been a blast and we didn't get beat up in the process. Much plusher ride. I just picked up a 2 dr Jk and I'm considering throwing another one of these on it but there are some other o

Write Your Own Review

Stars 1 2 3 4 5

You may also like...

Customer Photos

There are currently no customer photos. Add yours below!