Jeep Lift Kits

2007 - 2013 Jeep JK Wrangler 4" Suspension

Home » Suspension Lifts » Jeep » 07-13 JK Wrangler

Jeep JK 4" Suspension Jeep JK 4" Suspension Performance 2.2 series shocks Jeep JK Rear Coil Correction Plates +Click to Enlarge Motive Gear - Gear Packages

Price: $575.95 - $499.95!
Kit Contents:
Front: Lifted coil springs, track bar bracket, pitman arm, sway-bar links, brake line brackets, shock relocation brackets & hardware.

Rear: Lifted coils springs, track bar drop bracket, coil correction plates, cam bolts, brake line relocation brackets & hardware.

Shocks: Features (4) Performance 2.2 series shocks.

Ships Same Day

Order must be placed by 4:00pm (CST) and parts ordered must be in stock.
Notes:
• 2012-2013 models require exhaust modification to clear front driveshaft.
Benefits:
• 100% bolt-on installation.
• Increased ground clearance.
• Coil correction plates corrects the rear coil angle 10 degrees.
• Coil correction plates allows the rear coil springs to function more effeciently.
• Premium Performance 2.2 series shocks.
• Unique coil springs for 4-door & 2-door models.
Press:
• Project-Jk.com: Read Review
Specs:
• Part #: 682S (2door)
• Part #: 681S (4door)
• Install Time: 4 - 5 hours
• Wheel Backspacing: 4.5" - 4.75"
• Recommended Tire Size: 35x12.50
• Download Instructions: View

Kit Notes

On Automatic equipped vehicles; due to use of an oversize driveshaft from the factory and inadequate factory clearance it may be possible for the front driveshaft to come in contact with the automatic transmission pan tearing the factory boot and rubbing on the shaft. Generally this occurs during heavy articulation when front sway bar links are disconnected and longer shocks are installed. If this is found to occur, the proper procedure would be to replace the oversize factory shaft with an aftermarket smaller diameter shaft to increase clearance between the transmission and front driveshaft. Rough Country does offer this driveshaft if needed.
Expand item for product details

recommended accessories

Front Extended Driveshaft
07-11 models ONLY
Qty
$499.95
Custom extended driveshafts which are recommended with the 4" suspension lift. Fits 2007-2011 4WD JK models ONLY!
Rear Extended Driveshaft
07-11 models ONLY
Qty
$499.95
Custom extended driveshafts which are recommended with the 4" suspension lift. Fits 2007-2011 4WD JK models ONLY!
1.5" Wheel Spacers
Qty
$59.95
Jeep JK 1.5" wheel spacers allow you to run your factory Jeep wheels. Features a hub centric design, preinstalled studs and made from corrosion resistant 6061-T6 aluminum. Mounts to 5 x 5" bolt pattern. Sold in pairs.
Performance Steering Stabilizer
Qty
$79.95
HIGHLY RECOMMENDED OPTION! This steering stabilizer allows for better on-road and off-road handling, improves tie rod and ball joint wear, as well as replaces your boring stock stabilizer. Upgradeable to dual kit at any time.
Performance Dual Steering Stabilizer
Qty
$129.95
This steering stabilizer allows for better on-road and off-road handling, as well as improves tie rod and ball joint wear. This kit features our High Performance 2.2 series stabilizer cylinders and includes all brackets and hardware.
Only fits JK with 2" - 6" of lift.
Exhaust Extensions
*2012-2013 Models*
Qty
$39.95
Recommended for 2012-2013 JK models equipped with 2" - up of suspension to gain clearance from the front driveshaft.
Exhaust Y-Pipe
2012-2013 Unlimited (4 door) models ONLY
Qty
$229.95
Stock exhaust pipes on JK's lifted more than 2" can make contact with the front driveshaft during downward suspension travel. Our aftermarket Y-pipe eliminates this problem by moving the exhaust pipe behind the crossmember out of the drivshaft's way. Kit is made from ultra-durable, corrosion resistant stainless steel tubing. Installation video
Sway-bar Disconnects
Qty
$59.95
Quick disconnects give your Jeep better articulation off road with the pull of a pin, but allows you to keep on road handling and stability. These links have two hole adjustments and accommodate 3.5" - 6" JK suspension lifts.

Expand item for product details

upgrades / accessories

1.25" Body Lift Kit
Qty
$99.95
This Rough Country Body Lift provides a full 1.25" of additional tire clearance, as opposed to the standard 1" provided by most other manufacturers. The 1.25" spacers nest with the factory body mounts keeping the body properly aligned with the frame. This design provides lift while retaining the noise and vibration canceling characteristics of the factory mounts. The new shifter adapter allows you to run any 1" or 1.25" body lift on a JK with a manual transmission without having to cut the inner shift boot. It also gives you back the lost shifter length due to the body being raised away from the frame.
Adjustable Track Bar - Front
Qty
$109.95
Jeep JK front adjustable track bar fits 2.5" - 4" of lift. This kit helps re-center your axle, reducing wear and tear on sensitive suspension components.
Front Diff Guard
Qty
$59.95
Constructed from ¼" steel the RCX differential guards protect your axles from the hazards that can damage your differential. Made for the Dana 30, Dana 35, and Dana 44 axles.
Rear Diff Guard
Qty
$59.95
Constructed from ¼" steel the RCX differential guards protect your axles from the hazards that can damage your differential. Made for the Dana 30, Dana 35, and Dana 44 axles.
JK Winch Mount
Qty
$239.95
Add a winch to your JK without installing a new front bumper! Our mounting system utilizes the JK's factory bumper and installs with no cutting or drilling. This kit is complete with D-rings, mounting hardware and brackets.
Grab Handles
Qty
$28.95
These new handles feature tough nylon webbing, soft foam handle, durable velcro sure grip enclosure and a neoprene cover with the Rough Country Logo. Sold in pairs.
OEM Steering Stabilizer
Qty
$29.95
OEM replacement steering stabilizer allows for better on-road and off-road handling with oversized tires, as well as reduces tie rod and ball joint wear and tear.

Vehicle & Kit Options

Select Model
Qty
$499.95