Jeep Lift Kits

1997-2006 Jeep TJ 2.5" Long Arm Suspension

Home » Suspension Lifts » Jeep » 97-06 TJ Wrangler

Jeep TJ 2.5" Long Arm Suspension X-Flex Joints +Click to Enlarge Motive Gear - Gear Packages

Price: $1499.95
Kit Contents:
Extreme Flex without the Extreme Price

Front: High flex coil springs, lower high clearance arms with X-Flex Joints, upper control arms with X-Flex Joints, control arm mounting brackets, adjustable track bar, bumpstops, sway-bar disconnects, bumpstop extensions and stainless steel braided brakelines.

Rear: High flex coil springs, lower high clearance arms with X-Flex Joints, upper control arms with X-Flex Joints, track bar bracket, extended sway bar links and stainless steel braided brakeline.

Shocks: Kit includes (4) High Performance 2.2 series shocks.

Ships Same Day

Order must be placed by 4:00pm (CST) and parts ordered must be in stock.
Notes:
• Does NOT fit Unlimited models
• Exhaust will have to be cut and rerouted to make
sure it is away from the moving components.
Benefits:
• Includes our 2.2 High Performance Shocks.
• Features high clearance lower control arm design.
• Extreme travel long arms keep optimum alignment
and give optimum articulation.
• Unbeatable value and best prices in the market!
• Upgradeable with our Jeep X-tras. - Click Here -
• Features our NEW X-Flex control arms:
  • • Massive flex joints with 2.5" diameter body and huge 1.25" threads
  • • All joints are fully rebuildable
  • • Fully greasable
  • • Adjustable retainer ring
  • • Upper joints pivot up to 20 degrees
  • • Lower joints pivot up to 35 degrees
Specs:
• Part #: PERF628 [4 cyl]
• Part #: PERF629 [6 cyl]
• Install Time: 8 - 9 hours
• Wheel Backspacing: 4.5"
• Recommended Tire Size: 32x11.50
• Download Instructions: View

Expand item for product details

recommended accessories

High Clearance Skid Plate
Qty
$259.95
Gain up to 2" of clearance! SYE, CV Driveshaft, Motor Mount Lift and 1.25" Body Lift are REQUIRED with 2.5" suspension - up! Rubicon models require Compressor Relocation Bracket [1123]. Kit includes skid plate, transmission mounting plate and hardware.
Rubicon Compressor Relocation Bracket
*Required with skid plate*
Qty
$19.95
Required relocation bracket for high clearance skid plate to mount to Jeep TJ Rubicon models.
NP231 Slip Yoke Eliminator
*Required with skid plate*
Qty
$199.95
Once you have lifted your Jeep and installed bigger tires on it, the stress on the slip yoke or rear output shaft is often too much. This kit includes everything to modify your transfer case, this kit does require our extended travel driveshaft.**Rubicon models do not need SYE kit.**
CV Rear Driveshaft
Qty
$299.95
This custom CV extended travel driveshaft helps to prevent driveline vibration and the rear ouput shaft from breaking. Required with slip yoke eliminator kit.
1.25" Body Lift Kit
*Required with skid plate*
Qty
$99.95
This Rough Country Body Lift provides a full 1.25" of additional tire clearance, as opposed to the standard 1" provided by most other manufacturers. The 1.25" spacers nest with the factory body mounts keeping the body properly aligned with the frame. This design provides lift while retaining the noise and vibration canceling characteristics of the factory mounts
Motor Mount Lift
*Required with skid plate*
Qty
$54.95
This kit is the perfect addition to any Jeep with a 1" - 3" body lift or for those installing a belly up pan. This kit tips the rear of the transfer case down slightly, correcting pinion angle.
1.5" Wheel Spacers
Qty
$59.95
Jeep TJ 1.5" wheel spacers allow you to run your factory Jeep wheels. Mounts to 5 x 4.5" bolt pattern. Sold in pairs.
Performance Steering Stabilizer
Qty
$49.95
Our Ultimate Performance 2.2 series replacement steering stabilizer allows for better on-road and off-road handling with oversized tires, as well as reduces tie rod and ball joint wear and tear.

Expand item for product details

upgrades / accessories

Grab Handles
Qty
$28.95
These new handles feature tough nylon webbing, soft foam handle, durable velcro sure grip enclosure and a neoprene cover with the Rough Country Logo. Sold in pairs.
Front Diff Guard
Qty
$59.95
Constructed from ¼" steel the RCX differential guards protect your axles from the hazards that can damage your differential. Made for the Dana 30, Dana 35, and Dana 44 axles.
Rear Diff Guard
Qty
$59.95
Constructed from ¼" steel the RCX differential guards protect your axles from the hazards that can damage your differential. Made for the Dana 30, Dana 35, and Dana 44 axles.

Vehicle & Kit Options

Select Engine
Qty
$1499.95