4in Jeep X-series Suspension Lift Kit
Overview
Features
- Easy bolt-on installation
- Increased ground clearance
- Levels the front with the rear of the vehicle
- Includes application valved N2.0 series shock absorbers which offer the best in balanced performance for on and off-road use.
- X-Flex control arm features:
- Clevite brand OEM style rubber bushings.
- Flex joints are fully rebuildable.
- Flex joints feature a massive 2.5" diameter body and 1.25" thread.
- Fully greasable.
- Adjustable retainer ring.
- Upper joints pivot up to 20 degrees.
- Lower joints pivot up to 35 degrees.
Notes
- IMPORTANT- Does NOT fit AWD models.
- Models equipped with a CV style front driveshaft may result in driveshaft vibration. If this occurs, replacing the driveshaft, axle yoke and / or transfer case yoke will need to be performed to rid the vehicle of driveline vibration.
CV Driveshaft Example
| SKU | 68820 |
|---|---|
| Est. Install Time | 4-6 hours |
| Recommended Tire Size | 31x10.50 R15 |
| Recommended Wheel Backspacing | Factory |
Front
- Lifted coil springs
- Adjustable lower control arms
- Extended sway-bar links
- Bumpstop extensions
- Hardware
Rear
- Lifted coil springs
- Adjustable upper control arms
- Adjustable lower control arms
- Sway-bar brackets
- Bumpstop brackets
- Brake line brackets
- Track bar bracket
- Hardware
Shocks
- (4) Premium N3 Series
- Est. Install Time: 4-6 hours
- View Instruction Sheet
Vehicle Fitment
| Years | Drive | Make | Model |
|---|---|---|---|
| 1993-1998 | 4WD | Jeep | Grand Cherokee ZJ |
ALWAYS read all product page details for more important fitment information