Featured Builds
7 Inch Lifted 1998 Jeep Grand Cherokee 4WD
that_beater_zj
4 Inch Lift Kit Long Arm | Jeep Grand Cherokee ZJ 4WD (1993-1998)
Overview
Boasting some impressive features, the ZJ Longarm Kit is a comprehensive package including everything needed for a great suspension lift while maintaining the vehicle's crucial center of gravity. The kit includes adjustable high-clearance X-Flex upper and lower control arms with Clevite bushings, featuring X-Flex joints. This lift kit features high-clearance components with a front y-link and rear 4-link control arm design. This promotes extreme axle flex while keeping pinion angles optimized.
Features
- Aggressive appearance
- Increased ground clearance
- HD 0.25" thick crossmember
- Lower control arms feature high clearance design
- Front adjustable track bar is made of forged solid steel for unsurpassed strength and durability
- Extreme travel long arms keep optimum alignment and give optimum articulation.
- X-Flex control arm features:
- Clevite brand OEM style rubber bushings.
- Flex joints feature a massive 2.5" diameter body and 1.25" thread.
- Fully greasable.
- Upper joints pivot up to 20 degrees.
- Lower joints pivot up to 35 degrees.
Notes - Important
- Does NOT fit AWD models.
- Transfer case skid plate will NOT fit models equipped with 249 transfer case.
- Exhaust will have to be cut and rerouted to make sure it is away from the moving components.
- Models equipped with a CV style front driveshaft may result in driveshaft vibration. If this occurs, replacing the driveshaft, axle yoke and / or transfer case yoke will need to be performed to rid the vehicle of driveline vibration.
CV Driveshaft Example
Specs
| SKU | 90222 |
|---|---|
| Est. Install Time | 8-9 hours |
In the Box
Front
- Lifted coil springs
- Adjustable upper control arms
- Adjustable lower control arms
- Crossmember
- Transfer case skid plate
- Sway-bar quick disconnects
- Forged Adjustable track bar
- Track bar bracket
- 3" Bumpstops
- Hardware
Rear
- Lifted coil springs
- Adjustable upper control arms
- Adjustable lower control arms
- Long arm frame brackets
- Track bar bracket
- Bumpstop brackets
- Brake line brackets
- Hardware
Shocks
- (4) Premium N3 Series
Instructions
- Est. Install Time: 8-9 hours
- View Instruction Sheet
Vehicle Fitment
| Years | Drive | Make | Model |
|---|---|---|---|
| 1993-1998 | 4WD | Jeep | Grand Cherokee |
ALWAYS read all product page details for more important fitment information
Recommended Tires & Wheels
| Tire | Wheel | Bolt Pattern | Offset | Note |
|---|---|---|---|---|
| 31x10.50R15 | Factory 15 | 5x4.5 | - | - |
| 31x10.50R15 | 15x8 | 5x4.5 | -19 | - |
| 31x10.50R15 | 15x8 | 5x4.5 | -19 | - |
| 31x10.50R15 | 15x8 | 5x4.5 | -18 | - |
| 31x10.50R15 | 15x8 | 5x4.5 | -12 | - |
| 31x10.50R15 | 15x8 | 5x4.5 | -6 | - |
Due to differences in manufacturing, dimension and inflated measurements, tire and wheel combinations should be test fit prior to installation
