1.5 Inch Leveling Kit Ford Super Duty 4WD (2005-2023)
Overview
If you want to alter the look of your Ford F-250 or F-350 Super Duty pickup truck, Rough Country’s 1.5-inch Leveling Kit is the easiest way to go! At stock height, Ford’s Super Duty trucks sit higher in the rear giving your truck a "nose-down" look. This easy-to-install kit raises the front of your truck 1.5-inches leveling the front with the rear for a vastly improved appearance and additional ride height resulting in the capability to run up to 33-inch tires.
The 100% bolt-on installation process makes this leveling kit incredibly easy to install, even in a home garage with common tools. These solid, aluminum spacers are designed with a slight lip allowing the spacer to lock into the factory seat eliminating any guess work in lining it up allowing you to easily match the factory angle and orientation for a perfect fit.
The 100% bolt-on installation process makes this leveling kit incredibly easy to install, even in a home garage with common tools. These solid, aluminum spacers are designed with a slight lip allowing the spacer to lock into the factory seat eliminating any guess work in lining it up allowing you to easily match the factory angle and orientation for a perfect fit.
Features
- Easy bolt-on installation
- Maintains factory ride quality
- Increased ground clearance
- Levels the front with the rear of the vehicle
- Spacers are designed with a slight lip allowing the spacer to lock into the factory seat for a perfect fit.
Notes - Important
- Does not fully level 2017 models
- Does NOT work on models equipped with Tremor Factory Trim Package
Specs
Est. Install Time | 2-3 hours |
---|
In the Box
Front
- (2) Coil seat spacers
- Hardware
Instructions
- Est. Install Time: 2-3 hours
- View Instruction Sheet
Vehicle Fitment
Years | Drive | Make | Model |
---|---|---|---|
2005-2023 | 4WD | Ford | F-250 Super Duty |
2005-2023 | 4WD | Ford | F-350 Super Duty |
ALWAYS read all product page details for more important fitment information
Recommended Tires & Wheels
Tire | Wheel | Bolt Pattern | Offset | Note |
---|---|---|---|---|
33x12.50R20 | Factory 20 | 8x170 | - | - |
33x12.50R18 | Factory 18 | 8x170 | - | - |
33x12.50R17 | Factory 17 | 8x170 | - | - |
33x12.50R17 | 17x8.5 | 8x170 | +0 | - |
33x12.50R17 | 17x8.5 | 8x170 | +1 | - |
33x12.50R17 | 17x9 | 8x170 | -12 | - |
33x12.50R17 | 17x9 | 8x170 | +0 | - |
33x12.50R17 | 17x9 | 8x170 | +1 | - |
33x12.50R17 | 17x9 | 8x170 | +12 | - |
33x12.50R18 | 18x8.5 | 8x170 | +0 | - |
33x12.50R18 | 18x8.5 | 8x170 | +1 | - |
33x12.50R18 | 18x9 | 8x170 | -12 | - |
33x12.50R18 | 18x9 | 8x170 | +0 | - |
33x12.50R18 | 18x9 | 8x170 | +1 | - |
33x12.50R18 | 18x9 | 8x170 | +12 | - |
33x12.50R20 | 20x9 | 8x170 | -12 | - |
33x12.50R20 | 20x9 | 8x170 | +0 | - |
33x12.50R20 | 20x9 | 8x170 | +1 | - |
33x12.50R20 | 20x9 | 8x170 | +12 | - |
33x12.50R20 | 20x10 | 8x170 | -24 | Minor Trimming |
33x12.50R20 | 20x10 | 8x170 | -19 | Minor Trimming |
305/55R20 | 20x10 | 8x170 | -19 | Minor Trimming |
285/55R20 | 20x10 | 8x170 | -19 | - |
33x12.50R20 | 20x10 | 8x170 | -18 | Minor Trimming |
305/55R20 | 20x10 | 8x170 | -18 | Minor Trimming |
285/55R20 | 20x10 | 8x170 | -18 | - |
33x12.50R20 | 20x12 | 8x170 | -44 | Minor Trimming |
305/55R20 | 20x12 | 8x170 | -44 | Minor Trimming |
33x12.50R22 | 22x10 | 8x170 | -24 | Minor Trimming |
33x12.50R22 | 22x10 | 8x170 | -19 | Minor Trimming |
33x12.50R22 | 22x10 | 8x170 | -18 | Minor Trimming |
33x12.50R22 | 22x12 | 8x170 | -44 | Trimming Required |
Due to differences in manufacturing, dimension and inflated measurements, tire and wheel combinations should be test fit prior to installation