1.5 Inch Leveling Kit Ford Bronco/F-150 (1980-1996)
Overview
Give your Ford a level look from front to rear with Rough Country’s 1.5in coil spring leveling kit! This easy-to-install leveling kit raises the front of your vehicle to be equal height with the rear for a leveled, flush look that gives a better ride height and more aggressive appearance.
This kit features a set of front, durable coil springs allowing you gain additional ride height without sacrificing ride quality or performance, and is considered one of the best ways to lift a Ford truck! Once installed, this kit can run up to a 32x11.50 tire with factory wheel backspacing. Includes Rough Country’s 5-year Coil Spring Warranty!
Features
- Easy bolt-on installation
- Increased ground clearance
- Levels the front with the rear of the vehicle
Specs
| SKU | 9265 |
|---|---|
| Est. Install Time | 1-2 hours |
In the Box
Front
- Leveling coil springs
Instructions
- Est. Install Time: 1-2 hours
- View Instruction Sheet
Vehicle Fitment
| Years | Drive | Make | Model |
|---|---|---|---|
| 1980-1996 | 4WD | Ford | Bronco |
| 1980-1996 | 2WD | Ford | F-150 |
| 1980-1996 | 4WD | Ford | F-150 |
ALWAYS read all product page details for more important fitment information
Recommended Tires & Wheels
| Tire | Wheel | Bolt Pattern | Offset | Note |
|---|---|---|---|---|
| 32x11.50R15 | Factory 15 | 5x5.5 | - | - |
| 31x10.50R15 | 15x8 | 5x5.5 | -19 | - |
| 265/75R16 | 16x8 | 5x5.5 | -19 | - |
| 265/70R17 | 17x8.5 | 5x5.5 | +0 | - |
| 265/70R17 | 17x8.5 | 5x5.5 | +1 | - |
| 265/70R17 | 17x9 | 5x5.5 | +0 | - |
| 265/70R17 | 17x9 | 5x5.5 | +1 | - |
| 265/65R18 | 18x8.5 | 5x5.5 | +0 | - |
| 265/65R18 | 18x8.5 | 5x5.5 | +1 | - |
| 285/65R18 | 18x9 | 5x5.5 | +0 | - |
| 265/65R18 | 18x9 | 5x5.5 | +0 | - |
| 285/65R18 | 18x9 | 5x5.5 | +1 | - |
| 265/65R18 | 18x9 | 5x5.5 | +1 | - |
| 285/55R20 | 20x9 | 5x5.5 | +0 | - |
| 265/60R20 | 20x9 | 5x5.5 | +0 | - |
| 285/55R20 | 20x9 | 5x5.5 | +1 | - |
| 265/60R20 | 20x9 | 5x5.5 | +1 | - |
Due to differences in manufacturing, dimension and inflated measurements, tire and wheel combinations should be test fit prior to installation
