5 Inch Lift Kit Multiple Makes & Models (Ford/Mazda)
Overview
Give your Ford Ranger a commanding, aggressive appearance and impressive off-road capabilities with Rough Country’s 5in Suspension Lift! This all-inclusive kit comes with everything you need for increased ground clearance and a lifted, leveled stance.
Rough Country’s 5in Suspension lift includes front and rear crossmembers and a set of lifted knuckles, offering plenty of ride height to clear up to a 33-inch tire! A set of included, front brake lines and a durable steel skid plate help ensure your Ranger is ready to tackle any terrain with plenty of clearance and protection. For an impressive ride quality both on and off-road, this kit also includes Rough Country’s nitrogen-charged N3 shocks. These 10-stage variable valving shocks feature a durable 18mm spring loaded piston rod, huge 54mm shock body, and reinforced seals for a long lifespan of smooth performance.
This kit requires only minor cutting to install, and features a set of upper control arm cam bolts making it easy to achieve a proper alignment after lifting. Best of all, this kit includes Rough Country’s Lifetime Replacement Guarantee!
Rough Country’s 5in Suspension lift includes front and rear crossmembers and a set of lifted knuckles, offering plenty of ride height to clear up to a 33-inch tire! A set of included, front brake lines and a durable steel skid plate help ensure your Ranger is ready to tackle any terrain with plenty of clearance and protection. For an impressive ride quality both on and off-road, this kit also includes Rough Country’s nitrogen-charged N3 shocks. These 10-stage variable valving shocks feature a durable 18mm spring loaded piston rod, huge 54mm shock body, and reinforced seals for a long lifespan of smooth performance.
This kit requires only minor cutting to install, and features a set of upper control arm cam bolts making it easy to achieve a proper alignment after lifting. Best of all, this kit includes Rough Country’s Lifetime Replacement Guarantee!
Features
- Lifts and levels front with rear
- Increased ground clearance
- Includes upper control arm cam bolts for easier alignment
Notes - Important
- 17in or larger wheels are REQUIRED.
- Does NOT fit 11.25" rotors found on some 98-03 models.
- Does NOT fit models with 31 spline rear axle.
- Models with 11.25" rotors must upgrade to 12.1" rotors.
- Models equipped with pulse vacuum hub (PVH) port routed through the knuckle will need to be converted to manual hubs.
- An upgraded drive shaft is HIGHLY recommended, such as SKU: 5089.1.
- A torsion bar tool is required for installation, such as SKU: 1067.
- Specialty tools may be required for models equipped with vacuum operated hubs. (see instructions)
Specs
SKU | 43130 |
---|---|
Est. Install Time | 6-8 hours |
In the Box
Front
- Front Crossmember
- Lifted Knuckles
- Skid Plate
- Differential Brackets
- Torsion Drop Brackets
- Sway Links
- Extended Brake Lines
Rear
- Rear Crossmember
- Differential Brackets
- Bump Stops
- Brake Line Brackets
- Anti-Wrap Rear Blocks
- U-Bolts
Shocks
- (4) Premium N3 Shocks
Instructions
- Est. Install Time: 6-8 hours
- View Instruction Sheet
Vehicle Fitment
Years | Drive | Make | Model |
---|---|---|---|
1998-2011 | 4WD | Ford | Ranger |
1998-2008 | 4WD | Mazda | B3000 |
1998-2009 | 4WD | Mazda | B4000 |
ALWAYS read all product page details for more important fitment information
Recommended Tires & Wheels
Tire | Wheel | Bolt Pattern | Offset | Note |
---|---|---|---|---|
285/70R17 | 17x9 | 5x4.5 | -12 | - |
285/65R18 | 18x9 | 5x4.5 | -12 | - |
285/55R20 | 20x9 | 5x4.5 | -12 | - |
Due to differences in manufacturing, dimension and inflated measurements, tire and wheel combinations should be test fit prior to installation