6 Inch Lift Kit Ford Super Duty 4WD (1999)
Overview
Features
- Easy bolt-on installation
- Increased ground clearance
- Levels the front with the rear of the vehicle
- Includes application valved N3 series shock absorbers which offer the best in balanced performance for on and off-road use.
Notes - Important
- Does NOT fit V-8 gas engine models.
- Does NOT fit dually models.
- Does NOT fit models with a production date on or after 3-1-1999
- A carrier bearing drop bracket is needed for trucks equipped with a 2-piece rear driveshaft. (#1197)
Specs
| Est. Install Time | 6-8 hours |
|---|
In the Box
Front
- Lifted leaf springs
- Sway-bar links
- Track bar drop bracket
- Pitman arm
- U-bolts
- Hardware
Rear
- Lifted leaf springs
- U-bolts
- Hardware
Shocks
- (4) Premium N3 series
Instructions
- Est. Install Time: 6-8 hours
- View Instruction Sheet
Vehicle Fitment
| Years | Drive | Make | Model |
|---|---|---|---|
| 1999-1999 | 4WD | Ford | F-250 Super Duty |
| 1999-1999 | 4WD | Ford | F-350 Super Duty |
ALWAYS read all product page details for more important fitment information
Recommended Tires & Wheels
| Tire | Wheel | Bolt Pattern | Offset | Note |
|---|---|---|---|---|
| 37x12.50R17 | 17x9 | 8x170 | -12 | - |
| 37x12.50R17 | 17x9 | 8x170 | +0 | - |
| 37x12.50R18 | 18x9 | 8x170 | -12 | - |
| 37x12.50R18 | 18x9 | 8x170 | +0 | - |
| 37x12.50R20 | 20x9 | 8x170 | -12 | - |
| 37x12.50R20 | 20x9 | 8x170 | +0 | - |
| 37x12.50R20 | 20x10 | 8x170 | -25 | - |
| 37x12.50R20 | 20x10 | 8x170 | -24 | - |
| 37x12.50R20 | 20x10 | 8x170 | -19 | - |
| 35x12.50R20 | 20x10 | 8x170 | -19 | - |
| 37x12.50R20 | 20x10 | 8x170 | -18 | - |
| 35x12.50R20 | 20x10 | 8x170 | -18 | - |
| 37x12.50R20 | 20x12 | 8x170 | -44 | Trimming Required |
| 35x12.50R20 | 20x12 | 8x170 | -44 | - |
| 37x12.50R22 | 22x10 | 8x170 | -25 | - |
| 37x12.50R22 | 22x10 | 8x170 | -24 | - |
| 37x12.50R22 | 22x10 | 8x170 | -19 | - |
| 35x12.50R22 | 22x10 | 8x170 | -19 | - |
| 37x12.50R22 | 22x10 | 8x170 | -18 | - |
| 35x12.50R22 | 22x12 | 8x170 | -44 | - |
Due to differences in manufacturing, dimension and inflated measurements, tire and wheel combinations should be test fit prior to installation
