VIEW
682-config
4in Jeep Suspension Lift Kit (07-18 Wrangler JK)
SKU
682-config
Brand
Rough Country
Loading
Give your Jeep a total transformation with Rough Country’s 4in Suspension Lift! This all-inclusive kit comes with everything you need to give your vehicle aggressive good looks and improved off-road performance!<
Overview
Give your Jeep a total transformation with Rough Country’s 4in Suspension Lift! This all-inclusive kit comes with everything you need to give your vehicle aggressive good looks and improved off-road performance!
This kit features lifted coil springs and coil correction plates, providing lift height and impeccable vibration dampening on any terrain.
Best of all, this kit features Rough Country's premium N3 shocks! These 10-stage variable valving, high-pressure Nitrogen charged shocks offer a fantastic blend of off-road action and smooth highway ride quality. With a durable 18mm spring-loaded piston rod and faster-cooling 54mm shock body, this shock offers up to 36kN Tensile Strength for a long lifespan of impressive vibration dampening. Features natural rubber bushings and an eye-catching metallic silver paint.Read More
This kit features lifted coil springs and coil correction plates, providing lift height and impeccable vibration dampening on any terrain.
Best of all, this kit features Rough Country's premium N3 shocks! These 10-stage variable valving, high-pressure Nitrogen charged shocks offer a fantastic blend of off-road action and smooth highway ride quality. With a durable 18mm spring-loaded piston rod and faster-cooling 54mm shock body, this shock offers up to 36kN Tensile Strength for a long lifespan of impressive vibration dampening. Features natural rubber bushings and an eye-catching metallic silver paint.Read More
Features
- Easy bolt-on installation
- Increased ground clearance
- Coil correction plates correct the rear coil spring angle by 10 degrees, allowing them to function more effeciently.
Notes - Important
- Does NOT fit 4-door (Unlimited) models.
- 2012-2018 models require exhaust modifications to clear the front driveshaft (#1030)
- On Automatic equipped vehicles; due to use of an oversize driveshaft from the factory and inadequate factory clearance it may be possible for the front driveshaft to come in contact with the automatic transmission pan tearing the factory boot and rubbing on the shaft. Generally this occurs during heavy articulation when front sway bar links are disconnected and longer shocks are installed. If this is found to occur, the proper procedure would be to replace the oversize factory shaft with an aftermarket smaller diameter shaft to increase clearance between the transmission and front driveshaft. Rough Country does offer this driveshaft if needed.
Specs
| Est. Install Time | 4-6 hours |
|---|
In the Box
Front
- Lifted coil springs
- Track bar drop bracket
- Pitman arm
- Brake line relocation brackets
- Shock relocation brackets
- Cam bolts
- Hardware
Rear
- Lifted coil springs
- Extended sway-bar links
- Coil correction plates
- Track bar drop bracket
- Brake line relocation brackets
- Hardware
Shocks
- (4) Premium N3 Series
Instructions
- Est. Install Time: 4-6 hours
- View Instruction Sheet
Vehicle Fitment
| Years | Drive | Make | Model |
|---|---|---|---|
| 2007-2018 | 4WD | Jeep | Wrangler JK (2 Door) |
ALWAYS read all product page details for more important fitment information
Recommended Tires & Wheels
| Tire | Wheel | Bolt Pattern | Offset | Note |
|---|---|---|---|---|
| 35x12.50 R17 | 17x9 | 5x5 | -12 | - |
| 35x12.50 R17 | 17x9 | 5x5 | -6 | - |
| 35x12.50 R18 | 18x9 | 5x5 | -12 | - |
| 35x12.50 R18 | 18x9 | 5x5 | -6 | - |
| 35x12.50 R20 | 20x9 | 5x5 | -12 | - |
| 35x12.50 R20 | 20x9 | 5x5 | -6 | - |
Due to differences in manufacturing, dimension and inflated measurements, tire and wheel combinations should be test fit prior to installation