4 Inch Lift Kit | Toyota Tacoma 2WD/4WD (2005-2015)
SKU
746.20
Brand
Rough Country
Loading
Estimated ship date:Aug 03, 2021
Rough Country's new 4in and 6in kits offer an all-inclusive solution for taking your Tacoma to the next level. Featuring Beefy Front and Rear Crossmembers, Front and Rear Skid Plates, and our N3 shocks designed for on and off-road use, this kit has everything you need to get going at a fraction of the cost.
Overview
Here at Rough Country we think everyone should have an opportunity to enjoy the same off-road lifestyle, so we offer amazing equipment at an incredible value and back it with unbeatable service! With two new kit options for '05-up Toyota Tacomas, we're giving a whole new group a chance to take the road less traveled. Rough Country's new 4in and 6in kits offer an all-inclusive solution for taking your Tacoma to the next level. Featuring Beefy Front and Rear Crossmembers, Front and Rear Skid Plates, and our N3 shocks designed for on and off-road use, this kit has everything you need to get going at a fraction of the cost.Read More
Features
- Increased ground clearance.
- No strut disassembly or strut compressor required for installation.
- Features application valved N3 series shock absorbers which offer the best in balanced performance for on and off-road use.
- Fabricated blocks are stronger and offer a longer lifespan than cast blocks.
Notes - Important
- Requires minor cutting and drilling.
- Does NOT fit T/X Baja models.
- Does NOT fit XSP-X models.
- WILL fit 6-Lug Prerunner models.
- Requires aftermarket wheels - Does NOT work with factory wheels.
- Does NOT fit five lug models.
Specs
| SKU | 746.20 |
|---|---|
| Est. Install Time | 6-8 hours |
| Recommended Tire Size | 32x10.50 |
| Recommended Wheel Backspacing | 4"-5" |
In the Box
Front
- Lifted knuckles
- Strut spacers
- Front crossmember
- Rear crossmember
- Front skid plate
- Lower skid plate
- Differential drop brackets
- Steering stops
- Bumpstops
- Bumpstop extensions
- Sway-bar relocation brackets
- Brake line brackets
- Hardware
Rear
- 2in Fabricated lift blocks
- U-bolts
- Carrier bearing shims
- Brake line brackets
- Hardware
Shocks
- (2) Premium N3 series (rear)
Instructions
- Est. Install Time: 6-8 hours
- View Instruction Sheet
Vehicle Fitment
| Years | Drive | Make | Model |
|---|---|---|---|
| 2005-2015 | 2WD | Toyota | Tacoma |
| 2005-2015 | 4WD | Toyota | Tacoma |
ALWAYS read all product page details for more important fitment information
Recommended Tires & Wheels
| Tire | Wheel | Bolt Pattern | Offset | Note |
|---|---|---|---|---|
| 32x10.50R17 | 17x9 | 6x5.5 | -12 | - |
| 32x10.50R17 | 17x9 | 6x5.5 | -6 | - |
| 32x10.50R17 | 17x9 | 6x5.5 | +0 | - |
| 32x10.50R18 | 18x9 | 6x5.5 | -12 | - |
| 32x10.50R18 | 18x9 | 6x5.5 | -6 | - |
| 32x10.50R18 | 18x9 | 6x5.5 | +0 | - |
| 32x10.50R20 | 20x9 | 6x5.5 | -12 | - |
| 32x10.50R20 | 20x9 | 6x5.5 | -6 | - |
| 32x10.50R20 | 20x9 | 6x5.5 | +0 | - |
Due to differences in manufacturing, dimension and inflated measurements, tire and wheel combinations should be test fit prior to installation
