Featured Builds
6 Inch Lifted 2016 Toyota Tacoma
Rough Country
6 Inch Lifted 2016 Toyota Tacoma 2WD
The Orange Beast
6 Inch Lifted 2018 Toyota Tacoma 4WD
Bradley Moss
6 Inch Lifted 2019 Toyota Tacoma 2WD
Jesse keeton
6 Inch Lift Kit Toyota Tacoma 2WD/4WD (2016-2023)
Overview
You'll never look at a Tacoma the same way after installing Rough Country's 6in Toyota Tacoma kit. This all-inclusive kit is a total transformation for your truck, with durable lifted knuckles, front and rear crossmembers, fabricated lift blocks, and all the brackets and hardware needed to set your truck to a factory-like geometry while providing additional ground clearance.
Run up to 33 x 12.50 tires while giving your truck a one-of-a-kind look and exceptional off-road performance. This kit affords your truck an aggressive appearance and a higher profile that is sure to demand attention. This kit includes Rough Country’s Nitrogen-charged N3 Shocks for the ultimate balance in highway ride quality and off-road vibration dampening. Includes Rough Country’s Lifetime Replacement Guarantee.
Features
- Increased ground clearance.
- No strut disassembly or strut compressor required for installation.
- Features application valved N3 series shock absorbers which offer the best in balanced performance for on and off-road use.
- Fabricated blocks are stronger and offer a longer lifespan than cast blocks.
Notes - Important
- Requires cutting and drilling.
- Does NOT fit T/X Baja models.
- Does NOT fit XSP-X models.
- Requires aftermarket wheels - Does NOT work with factory wheels.
- Does NOT fit five lug models.
Specs
| Est. Install Time | 6-8 hours |
|---|
In the Box
Front
- Lifted knuckles
- Strut spacers
- Front crossmember
- Rear crossmember
- Front skid plate
- Lower skid plate
- Differential drop brackets
- Steering stops
- Bumpstops
- Bumpstop extensions
- Sway-bar relocation brackets
- Brake line brackets
- Hardware
Rear
- 4.5in Fabricated lift blocks
- U-bolts
- Carrier bearing shims
- Brake line brackets
- Hardware
Shocks
- (2) Premium N3 series (rear)
Instructions
- Est. Install Time: 6-8 hours
- Instruction Sheet - Kit Installation
- Instruction Sheet - Control Arm Installation
- Instruction Sheet - Strut Installation
- Instruction Sheet - Optional Front Vertex Installation
- Instruction Sheet - Optional Rear Vertex
Vehicle Fitment
| Years | Drive | Make | Model |
|---|---|---|---|
| 2016-2023 | 2WD | Toyota | Tacoma |
| 2016-2023 | 4WD | Toyota | Tacoma |
ALWAYS read all product page details for more important fitment information
Recommended Tires & Wheels
| Tire | Wheel | Bolt Pattern | Offset | Note |
|---|---|---|---|---|
| 33x12.50R17 | 17x8.5 | 6x5.5 | +0 | - |
| 33x12.50R17 | 17x8.5 | 6x5.5 | +1 | - |
| 33x12.50R17 | 17x9 | 6x5.5 | -12 | - |
| 33x12.50R17 | 17x9 | 6x5.5 | +0 | - |
| 33x12.50R17 | 17x9 | 6x5.5 | +1 | - |
| 33x12.50R18 | 18x8.5 | 6x5.5 | +0 | - |
| 33x12.50R18 | 18x8.5 | 6x5.5 | +1 | - |
| 33x12.50R18 | 18x9 | 6x5.5 | -12 | - |
| 33x12.50R18 | 18x9 | 6x5.5 | +0 | - |
| 33x12.50R18 | 18x9 | 6x5.5 | +1 | - |
| 33x12.50R20 | 20x9 | 6x5.5 | -12 | - |
| 33x12.50R20 | 20x9 | 6x5.5 | +0 | - |
| 33x12.50R20 | 20x9 | 6x5.5 | +1 | - |
| 305/55R20 | 20x10 | 6x5.5 | -25 | - |
| 305/55R20 | 20x10 | 6x5.5 | -24 | - |
Due to differences in manufacturing, dimension and inflated measurements, tire and wheel combinations should be test fit prior to installation
